| Date |
Time |
Class Title |
Contact |
|
|
|
|
| 7/6/2010 |
9:00 AM to 4:00 PM |
Mill Operator-IA |
Joyce Freese |
|
Location: Productivity, Inc.
9440 Atlantic Drive
Cedar Rapids, IA 52404 |
Pre Reg Info: |
| Target Audience:
Haas CNC Machining (Mill) Centers |
Trainer: Jeff Heishman |
| Special Instructions:
|
| *Coordinate System and How it Applies to the Machine Axes
*Mill Axis Orientation
*Work Co-Ordinate System and Selection
*Work Position Offsets
*Tooling Offsets
*Haas Mill Control Layout
*Settings and Paramaters
*Display Key Functions
*Mode Key Function
*Part Program Up-Load and Download Via. USB, Floppy, and Network
*Spindle and Feedrate Control
*Download, Setup and Run of Actual Part Program
*Haas Visual Quick Code Probing
|
| Register for this class |
|
| Date |
Time |
Class Title |
Contact |
|
|
|
This class is currently full.
|
| 7/7/2010 |
9:00 AM to 4:00 PM |
Mill Programming-IA |
Joyce Freese |
|
Location: Productivity Inc.
9440 Atlantic Drive
Cedar Rapids, IA 52404 |
Pre Reg Info: |
| Target Audience:
Haas CNC Machining (Mill) Center |
Trainer: Jeff Heishman |
| Special Instructions:
|
| 2 DAY CLASS
*The Coordinate System
*Work Zero/Machine Home
*Absolute and Incremental Programming
*Program Format
*Alphabetical Address codes
*Understanding G and M Codes
*S Commands
*T Commands
*Machine Defaults
*Linear Interpolation
*Circular Interpolation
*Rapid Traverse
*Canned Cycles |
|
|
| Date |
Time |
Class Title |
Contact |
|
|
|
|
| 7/7/2010 |
9:00 AM to 12:00 PM |
Visual Quick Code Probe System Training- MN |
Hope Riska |
|
Location: Productivity, Inc.
15150 25th Ave N
Plymouth, MN 55447 |
Pre Reg Info: |
| Target Audience:
|
Trainer: To Be Determined |
| Special Instructions:
|
| Two to three hour course designed for individuals that use Wireless Intuitive Probe System for setting tool length offsets and work offset coordinates. Calibration of the probe system is reviewed. Course does not cover using probes to measure features such as diameters, overall length, etc. on piece parts. |
| Register for this class |
|
| Date |
Time |
Class Title |
Contact |
|
|
|
|
| 7/12/2010 |
9:00 AM to 2:00 PM |
Tool Room Mill- MN |
Hope Riska |
|
Location: Productivity, Inc.
15150 25th Ave N.
Plymouth, MN 55422 |
Pre Reg Info: |
| Target Audience:
|
Trainer: To Be Determined |
| Special Instructions:
|
| This course covers operation for the Haas Tool Room Mill, including Intuitive Programming System. |
| Register for this class |
|
| Date |
Time |
Class Title |
Contact |
|
|
|
This class is currently full.
|
| 7/13/2010 |
9:00 AM to 4:00 PM |
Mill Operator-MN |
Hope Riska |
|
Location: Productivity Inc.
15150 25th Ave N
Plymouth, MN 55447 |
Pre Reg Info: |
| Target Audience:
Haas CNC Machining (Mill) Centers |
Trainer: To be determined |
| Special Instructions:
|
| This class is intended for people that will setup and run a Haas mill. The course covers use of the Haas control panel, download and upload of programs, the setting of tool length offsets, the setting of work coordinate offsets and production set up and operation of the machine tool. |
|
|
| Date |
Time |
Class Title |
Contact |
|
|
|
This class is currently full.
|
| 7/14/2010 |
9:00 AM to 4:00 PM |
Mill Programming-MN |
Hope Riska |
|
Location: Productivity Inc.
15150 25th Ave N.
Plymouth, MN 55447
|
Pre Reg Info: |
| Target Audience:
Haas CNC Machining (Mill) Center |
Trainer: To be determined |
| Special Instructions:
|
| This class is intended for individuals that use G-code to program Haas mills. Two day course covers program format, linear and circular interpolation, tool nose radius compensation and various canned cycle used for drilling, tapping, boring, pocket milling and threading. |
|
|
| Date |
Time |
Class Title |
Contact |
|
|
|
|
| 7/19/2010 |
9:00 AM to 4:00 PM |
Tool Room Lathe- MN |
Hope Riska |
|
Location: Productivity, Inc.
15150 25th Ave N.
Plymouth, MN 55422 |
Pre Reg Info: |
| Target Audience:
|
Trainer: To be determined |
| Special Instructions:
|
| This course covers operator and programming for the Haas Tool Room Lathe, including Intuitive Programming System. |
| Register for this class |
|
| Date |
Time |
Class Title |
Contact |
|
|
|
|
| 7/20/2010 |
9:00 AM to 4:00 PM |
Lathe Operator-MN |
Hope Riska |
|
Location: Productivity, Inc.
15150 25th Ave N
Plymouth, MN 55447
|
Pre Reg Info: |
| Target Audience:
Haas CNC Turning (Lathe) Center |
Trainer: To be determined |
| Special Instructions:
|
| This class is intended for individuals that will setup and run a Haas lathe. The course covers use of the Haas control panel, download and upload of programs, the setting of tool geometry offsets, the setting of work coordinate offsets, production set up and operation of the machine tool. |
| Register for this class |
|
| Date |
Time |
Class Title |
Contact |
|
|
|
|
| 7/20/2010 |
9:00 AM to 4:00 PM |
Lathe Operator-IA |
Joyce Freese |
|
Location: Productivity Inc.
9440 Atlantic Drive
Cedar Rapids, IA 52404 |
Pre Reg Info: |
| Target Audience:
Haas CNC Turning (Lathe) Center |
Trainer: Jeff Heishman |
| Special Instructions:
|
| *Coordinate System and How it Applies to the Machine Axes
*Absolute and Incremental Positioning
*Introduction to Programming with Codes and Creating a Program Format
*Familiarization with the HAAS Control and Features of the Machine Program Format
*Machine Set Up Procedures
*Program Input/Output
*Set Tools
*Set Part Zero
*Run a Basic Part Program
|
| Register for this class |
|
| Date |
Time |
Class Title |
Contact |
|
|
|
|
| 7/21/2010 |
9:00 AM to 4:00 PM |
Lathe Programming-IA |
Joyce Freese |
|
Location: Productivity Inc.
9440 Atlantic Drive
Cedar Rapids, IA 52404 |
Pre Reg Info: |
| Target Audience:
Haas CNC Turning (Lathe) Centers |
Trainer: Jeff Heishman |
| Special Instructions:
|
| 2 DAY CLASS
Introduction to Basic Programming Principles
1) The Coordinate System
2) Work Zero/Machine Home
3) Absolute and Incremental Programming
4) Program Format
5) Alphabetical Address codes
6) Understanding G and M Codes
7) S Commands
8) T Commands
9) Machine Defaults
10) Program Input/Output
11) Linear Interpolation
12) Circular Interpolation
13) Rapid Traverse
14) Canned Cycles
15) Basic Exercises
|
| Register for this class |
|
| Date |
Time |
Class Title |
Contact |
|
|
|
|
| 7/21/2010 |
9:00 AM to 4:00 PM |
Lathe Programming-MN |
Hope Riska |
|
Location: Productivity Inc.
15150 25th Ave N
Plymouth, MN 55447 |
Pre Reg Info: |
| Target Audience:
Haas CNC Turning (Lathe) Centers |
Trainer: To be determined |
| Special Instructions:
|
| This class is intended for individuals that use G-code to program Haas lathes. Two day course covers program format, linear and circular interpolation, tool nose radius compensation and various canned cycle used for drilling, turning, boring and threading. |
| Register for this class |